Customer Display Settings
Use EPSON TMNet WebConfig to register the dedicated customer display DM-D110, following
the procedures below.
1
Run EPSON TMNet WebConfig from shortcut on the desktop.
EPSON TMNet WebConfig is started.
2
Select [Settings] - [Web service settings], then [CustomerDisplay].
The "Customor display" screen is displayed.
100
If you perform settings from an external device, enter the following in the URL field
of your Web browser (such as the address bar).
http://"TM-DT's IP address"/webconfig
The default "TM-DT's IP address" for this product is "192.168.192.168".