Epson TM-T88V-DT Technical Reference Manual page 99

3
Set the following, then click [Add].
The information for the registered device is displayed in [Registered printers].
Item
Device ID
Type
Model no.
IP address
Retry interval
4
Click [Test printing] and check if the registered printer operates properly.
[Operating test] appears if the registered printer is TM-H6000IV, and [Test printing]
appears for printers other than TM-H6000IV.
Clicking [Operating test] displays the "Operating test" screen.
Use the "Operating test" screen to check the printer performance.
For detail, see
Set the device ID for the printer you want to register. (Any character
string)
Select network printer.
Select the printer model.
Input the IP address of the printer you want to control.
Set the timeout retry interval.
"Oparating test" on page
Description
135.
Chapter 2 Setup
2
99