Table of Contents
Advertisement
Removal of the inner glass
door panel
The inner glass door panel can easily be
removed for cleaning by unscrewing the
two screws. Figure 7.
During re-assembly, ensure that the inner
glass is correctly aligned and do not
over tighten the screws.
figure 7
Important notes
Installation, and any demonstration, information or adjustments are not included in the
warranty.
We recommend that the installation is carried out by qualified personnel.
To replace the interior oven lamp, unscrew the glass guard and make sure that the new
lamp has identical specifications, i.e. 15 Watts, 300°Centigrade. Be sure to switch off the
electrical supply.
Before calling for assistance
If your oven will not work, make sure that:
• Electricity is being supplied (check your fuse box; circuit breaker, etc.) and plug fuse.
• The appliance is properly plugged in.
• Please contact a Comet Service Centre in case of assistance.
Attention
The appliance gets very hot, mainly
around the cooking areas. It is very
important that children are not left
alone in the kitchen when you are
cooking.
9
Advertisement
Table of Contents
