Fixing The Oven - DèLonghi EOF260 User Operating Instructions Manual

Electric fan oven

Table of Contents

Fixing the oven

Introduce the oven into the furniture opening and fix it with screws as figure 10. It is

essential that the oven rests on a surface which will support its weight, as the screw

fixing is only complementary.

Warning!

It is very important that the upper slits of the control panel are not obstructed. These slits

are part of the ovens air circulation system and any blockage could result in overheating.

Note

It is essential that when installing your oven adequate air circulation is allowed for

within the installation. See figure 11.

Inadequate air circulation may greatly impair the performance of your oven and may

effect adjacent cabinets due to an increase in temperature.

Caution

Do not lift this oven by the door handle

For the "Built under" situation the front cross member of the oven housing Must Be

Removed leaving an air space of 7-10 mm between the top of the oven and the

underside of the work surface to assist ventilation.

Adjust the hinges of furniture doors adjacent to the oven to allow a 4-5 mm gap

between the furniture door and the oven frame

Where the oven is being installed and the adjacent doors are vinyl faced or of a

synthetic material then we suggest the use of side baffles which can be purchased from

Comet Accessories Direct telephone 0113231 0523. They are available in White, Brown

and Green.

figure 10

@@ @@

@@@@@

figure 11

Table of Contents