Inter-m LM-6414 Operation Manual page 8

MIC LINE MIXER
16. CUE SWITCHES
These buttons are used to select the associated output bus as active, sending signals routed to that bus to the
rear-panel output connector.
17. OUTPUT MONITOR SELECTOR
These buttons are used to select the output source for monitoring and headphones output.
18. HE DPHONE OUTPUT
This is a balanced 1/4" stereo jack for connection of headphones for monitoring the outputs of the busses as
selected by the Output Monitor Selector (17), or to monitor input channels where PFL switches (11) are
selected.
19. HE DPHONE G IN
This knob controls the output level of the headphone jack.
20. POWER INDIC TOR
This LED is lit when the power is switched on to the unit.
21. UX1/2 RETURN G IN CONTROLLER
This is a gain controller for the returned signal of UX1/2 RETURN from external device such as reverb
processor.
22. UX1/2 RETURN P N CONTROLLER
This is a P N level controller for the returned signal of UX1/2 RETURN from external device such as reverb
processor.
23. OUTPUT LEVEL DISPL Y SELECTOR
ON : STEREO L/R, PFL, MON, Level
OFF : BUS 1, 2, 3, 4
24. UX1/2 SEND G IN CONTROLLER
These are gain controller for each input channel audio to send UX1/2 SEND for external device such as
effector.
6
LM-6414