Front Panel - Inter-m LM-6414 Operation Manual

MIC LINE MIXER

Front Panel

Front Panel
1. PH NTOM POWER INDIC TOR
This LED indicator lights when phantom power is active at the microphone inputs.
2. PFL INDIC TOR LED
This LED lights when any of the Input Channel PFL switches are activated.
3. PH NTOM POWER SWITCH
Pressing this switch activates the +48VDC phantom power supply to all Input Channels, for use with
condenser mics requiring external power.
NOTE: It is safe to connect most modern dynamic microphones or line level devices to the channel inputs
when phantom power is activated. However, some older ribbon microphones may be damaged by phantom
power, and certain unbalanced line level devices may malfunction or produce an audible
hum when phantom power is active.
4. OUTPUT LEVEL METERS
These multi-segment LED meters display the output level as selected by the Output Monitor Selector Switch (17)(23).
5. CH NNEL OUTPUT SSIGN SWITCHES
These buttons assign the channel's input signal to the stereo output bus, or to the Bus 1/2 or Bus 3/4
outputs. ny combination of output busses may be chosen.
6. POWER SWITCH
This switch is used to switch the unit on and off.
When the unit is on, the Power Indicator LED (20) is lit.
4
LM-6414