Baby Lock Pro-Stitcher BLPS3 Instruction And Reference Manual page 94

 IMPORTANT: You must have administrator rights for the Windows computer you will use for the
Pro-Stitcher simulation.
3. Insert the USB flash drive into a USB port on the Windows computer you will use for simulation mode.
View the files on the USB drive. Right-click the Pro-Stitcher executable file (PSUpdate15.04.0071.exe,
in this example) and select Run as administrator. Pro-Stitcher will install onto the Windows computer
and then start.
 NOTE: If you receive the error
message at the right, simply select
Close.
4. You will see a pop-up message asking
whether you want to be able to run Pro-
Stitcher in simulation mode. Select Yes. If
you select No, Pro-Stitcher will not run.
5. When you receive this message, do not
yet select OK.
6. Remove the USB drive from the Windows computer and insert it into the Pro-Stitcher tablet computer
that is attached to the quilting machine's carriage.
7. On the Pro-Stitcher tablet, select Settings, Advanced, General. Then select the Create Simulation
License button.
8. When you receive the message License
file written, select OK. Remove the USB
drive.
Pro-Stitcher User Manual Settings Menu | 8.7