To Join Vertically Repeated Designs; Repeat Wrapping - Baby Lock Pro-Stitcher BLPS3 Instruction And Reference Manual

To join vertically repeated designs

Repeated Baptist
Fan design has been
joined vertically and
horizontally with
Point 2 Point.
• To link designs vertically, ensure the start and end points are at the same horizontal coordinate.
Then select Vertical Point 2 Point to align the designs such that the end point of the first design
matches up with the start point of the next design.
 NOTE: To manually enter a distance value between the designs in either the horizontal or vertical
distance box, you must first turn off Point 2 Point.

Repeat Wrapping

Use the wrapping options in conjunction with repeated designs. The options enable you to shift
rows or columns of repeated designs, or offset the entire design window. Typically you will wrap either a
row or a column, but not both.
• On the Design menu, select Repeat, then select Wrapping.
Removes all of the
wrapping actions
and resets the
design to its
unwrapped state.
5.20 | Design Menu
Column wrapping
options
Column wrapping
options
Vertical window
wrapping options
Horizontal window
wrapping options
Pro-Stitcher User Manual