Baby Lock Pro-Stitcher BLPS3 Instruction And Reference Manual page 76

3. Browse to the appropriate folder on the USB flash drive and double-tap the Art & Stitch installation file.
The Pro-Stitcher software will close and the installation will begin.
4. If you are prompted to Repair or Uninstall the Art & Stitch software, it is best to uninstall first and then
run the installation program again to install the new version.
 NOTE: To access the file browser after the Pro-Stitcher software is closed, either attach a keyboard
or press the keyboard icon at the top left-hand corner of the screen to open the pop-up keyboard.
Press and hold the Windows key followed by the letter E to open a file browser to locate and then
run the Art & Stitch installation file again.
5. After the new version of Art & Stitch is installed, reboot the Pro-Stitcher computer using the Windows
Start menu from the bottom of the computer screen. Select either Shut Down or Restart to shut the
computer down and restart.
Pro-Stitcher User Manual Art & Stitch | 6.3