Four-Faith F3125 User Manual page 54

There is a console port on Four-Faith router. Normally, this port is used to debug the router.
This port can also be used as a serial port. The router has embedded a serial to TCP program. The
data sent to the serial port is encapsulated by TCP/IP protocol stack and then is sent to the
destination server. This function can work as a Four-Faith DTU (Data Terminal Unit). Please refer
www.four-faith.com for more information about this product.
Baudrate: The serial port's baudrate
Databit: The serial port's databit
Parity: The serial port's parity
Stopbit: The serial port's stopbit
Flow Control: The serial port's flow control type.
Enable Serial TCP Function: Enable the serial to TCP function
Protocol Type: The protocol type to transmit data.
UDP(DTU) – Data transmit with UDP protocol , work as a Four-Faith DTU
which has application protocol and hear beat mechanism.
Pure UDP – Data transmit with standard UDP protocol.
TCP(DTU) -- Data transmit with TCP protocol , work as a Four-Faith DTU
which has application protocol and hear beat mechanism.
Pure TCP -- Data transmit with standard TCP protocol, router is the client.
TCP Server -- Data transmit with standard TCP protocol, router is the server.
TCST -- Data transmit with TCP protocol, Using a custom data
Server Address: The data service center's IP Address or domain name.
Server Port: The data service center's listening port.
Device ID: The router's identity ID.
Device Number: The router's phone number.
Xiamen Four-Faith Communication Technology Co.,Ltd.
rd
Add： J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324
F3X25 Series Router
Fax：+86 592-5912735
User Manual
Page 54 of 70