Four-Faith F3125 User Manual page 26

F3X25 Series Router
User Manual
route based on the fewest number of hops between the source and destination.
To enable the Dynamic Routing feature for the WAN side, select WAN. To enable this feature for
the LAN and wireless side, select LAN&WLAN. To enable the feature for both the WAN and
LAN, select Both. To disable the Dynamic Routing feature for all data transmissions, keep the
default setting, Disable.
Note：Dynamic Routing is not available in Gateway mode
Static Routing
Select set number: 1-50
Route Name: defined routing name by users, up to 25 characters
Metric: 0-9999
Destination LAN NET: the Destination IP Address is the address of the network or host to which
users want to assign a static route
Subnet Mask: the Subnet Mask determines which portion of an IP address is the network portion,
and which portion is the host portion
Gateway: IP address of the gateway device that allows for contact between the router and the
network or host.
Interface: indicate users whether the Destination IP Address is on the LAN & WLAN (internal
wired and wireless networks), the WAN (Internet), or Loopback (a dummy network in which one
PC acts like a network, necessary for certain software programs)
Show Routing Table
Xiamen Four-Faith Communication Technology Co.,Ltd.
Page 26 of 70
rd
Add： J1-J3,3 Floor,No.44,GuanRiRoad,SoftWare Park,XiaMen .361008.China
http：//www.fourfaith.com Tel： +86 592-6300326 6300325 6300324 Fax：+86 592-5912735