Touch Pad - Toshiba PORTÉGÉ M700 Maintenance Manual

4 Replacement Procedures

4.29 Touch pad

Removing the Touch pad
The following describes the procedure for removing the touch pad. (See Figure 4-44 to 4-46.)
1. Peel off the glass tapes.
2. Disconnect the relay cable from the connector on the touch pad.
3. Remove the following screw and touch pad assembly.
• M2.5×4.0B
Guide
4-74 [CONFIDENTIAL]
FLAT HEAD screw
Glass tape
Figure 4-44 Removing the touch pad (1)
×1
Glass tape
M2.5×4.0B FLAT HEAD
Touch pad assembly
Connector
PORTÉGÉ M700 Maintenance Manual (960-661)
4.29 Touch pad
Relay cable