Toshiba PORTÉGÉ M700 Maintenance Manual page 286

4 Replacement Procedures
Installing the Fan/Heat sink/CPU
The following describes the procedure for installing the fan/heat sink/CPU. (See Figure 4-32
to 4-36.)
1. Make sure that the cam of the CPU socket is in the unlock (OPEN) position.
2. Place the CPU on the CPU socket and check the CPU is installed on the correct
position.
3. Lock the CPU by rotating clockwise the cam on the CPU socket by 90 degrees with a
flat-blade driver.
4-58 [CONFIDENTIAL]
Figure 4-35 Installing the CPU
PORTÉGÉ M700 Maintenance Manual (960-661)
4.20 Fan/Heat sink/CPU