Toshiba PORTÉGÉ M700 Maintenance Manual page 314

4 Replacement Procedures
6. Turn up the insulator and peel off the glass tapes.
7. Disconnect the LCD cable and digitizer cable from the connectors on the back of the
LCD unit.
CAUTION: When removing the cables, be careful not to damage the connectors.
8. Remove the LCD assembly from the display cover.
CAUTION: When putting the LCD assembly on the display cover, lay a mat or something
under the LCD assembly to protect the computer and the LCD from a
scratch or breakage.
LCD assembly
4-86 [CONFIDENTIAL]
Glass tape
Glass tape
LCD cable
Figure 4-53 Removing the LCD assembly (2)
4.32 LCD unit/Touch panel/Digitizer
Insulator
Digitizer cable
PORTÉGÉ M700 Maintenance Manual (960-661)