Toshiba PORTÉGÉ M700 Maintenance Manual page 329

Hide thumbs Also See for PORTÉGÉ M700:

Table of Contents

4.32 LCD unit/Touch panel/Digitizer

Make sure the digitizer is inserted under the metal guides.

Do not make a gap between the digitizer and LCD.

3. Set the LCD unit/digitizer on the touch panel and stick the acetate tapes in place.

4. Connect the touch panel cable to the connector on the LCD assembly and stick the

glass tape in place.

5. Stand the LCD assembly on the display cover and connect the digitizer cable and

LCD cable on the back of the LCD assembly.

6. Turn up the insulator and stick two glass tapes on each connector.

PORTÉGÉ M700 Maintenance Manual (960-661)

4 Replacement Procedures

[CONFIDENTIAL]

Chapters

Table of Contents