Table of Contents
Advertisement
14. If your subsystem will be the last SCSI device, use the arrow buttons
to select Terminator in step 12.
Press "SEL" to enter Terminator.
The options are Enable and Disable. Since the subsystem is the last
SCSI device, press "SEL" to select Enable.
You may also install an active terminator into the Centronic connec-
tor located at the rear of the subsystem. Refer to section 3.3.3 for
more information.
15. Press "ESC" twice to return to the Main Menu.
16. Use the arrow buttons to move to the Save Config menu.
17. Press "SEL" to enter Save Config.
Use the arrow buttons to select "Yes" and press "SEL" to save the
configurations.
41 Host Chan 1
412 Terminator
412 Terminator
ENABLE
Main Menu
8 Save Config
8 Save Config
NO
Advertisement
Table of Contents
