Table of Contents
Advertisement
1.3 Unpacking Your Subsystem
Before we continue, you need to unpack your RAID-800S subsystem
and verify that the contents of the shipping carton are all there and in
good condition. Before removing the subsystem from the shipping
carton, you should visually inspect the physical condition of the
shipping carton. Exterior damage to the shipping carton may indicate
that the contents of the carton are damaged. If any damage is found, do
not remove the components; contact the dealer where you purchased
your subsystem for further instructions.
Your package contains the following items:
• RAID-800S subsystem unit
• One power cord
• Two 120 cm external SCSI cables
• One 9P-female to 9P-female RS-232 cable
• Installation reference guide
• Spare screws, etc.
• Nine keys (seven for mobile racks, two for power supplies)
If any of these items are missing or damaged, please contact your dealer
or sales representative for assistance.
Note:
Before you begin to use your RAID-800S subsystem,
read sections 1.4 and 1.5 to learn about the major
components installed in the subsystem and how they
can be used.
Advertisement
Table of Contents
