Table of Contents
Advertisement
15. The Power LED will turn green after it has been detected by the
subsystem. If the LED did not turn green, check the following:
a. Make sure the cables at the rear of the hard drive are connected
properly.
b. Make sure the hard drive is in good condition.
16. If the hard drive is not being accessed, the Access LED will not
illuminate. The LED blinks only when being accessed.
3.2.4 LEDs on the Mobile Rack
The 2 LEDs on the mobile rack indicate the status of the hard drive.
Access LED
The Access LED is also referred to as the HDD activity LED. This LED
blinks red only when the hard drive is being accessed.
Power LED
The Power LED is also referred to as the HDD status LED. This LED
indicates the status of the hard drive. The color of the LED changes
according to its operating status.
Fan holder
Figure 3-3: LEDs on the Mobile Rack
Access
LED
Keylock
Power
LED
Advertisement
Table of Contents
