Table of Contents
Advertisement
This is used to define the number of host and device channels used by
the subsystem. The options are "1" and "2". If you selected "1", the
other 3 channels become device channels. Refer to Chapter 3 for more
information on host channels and device channels.
This is used to define the total number of hard drives (in the slots)
used. This includes the hard drives after they have been chained. The
default is "8".
This is used to define the device channel and ID of a hard drive in a
particular slot.
The options are 4, 8, 16, 32 and 64. The default is 16.
Warning:
The settings in the Edit Chasis menu have been
predefined. These settings should not be altered unless
necessary. It is recommended that only experienced
users make changes to the default settings.
Chapter 6 Configuring the Subsystem
121
Advertisement
Table of Contents
