Splitting A Recording; Renaming Recordings - TechniSat HDTV 32 Plus Operating Manual

Now use the arrow keys up/down to set the Marker indicating the beginning
>
of the section to be copied.
The section to be copied will now be indicated in red on the progress indicator as
well as in the overview of existing markers.
Now press the green function key menu and use the up/down arrow keys to
>
mark the area to be copied.
Press OK to display a query window.
>
This contains information on the portion To be copied.
To confirm the copying of the portion, use the right/left arrow keys to indicate
>
the field OK and confirm with OK.
The marked section will now be copied to a new recording. Depending on the size of
the section, this may take several minutes.

7.3.1.3.9 Splitting a recording

This function allows you where, for instance, two successive programs were recorded as a
single recording, to split these into two individual recordings. Each recording will be split at
the point indicated by the relevant markers.
Recordings can be split as follows:
> Set a marker at the beginning of the section to be separated, as described under
Set marker.
Now use the arrow keys up/down to mark the marker from which the total
>
recording is to be split.
Now press the green function key Menu and use the arrow keys up/down to
>
mark the line split recording.
Press OK to display a query window.
>
This will show information relating to the two recordings to be created by the split.
To actually divide the recording, use the right/left arrow keys to indicate the field
>
OK and confirm with OK.

7.3.1.3.10 Renaming recordings

Your PVR removes information from the broadcast data stream concerning the name of the
broadcast programs. If a single recording includes several programs, all the names of the
stored programs are compiled and stored internally.
To rename a recording, proceed as follows:
Press the green function key Menu and use the up/down arrow keys to mark
>
the line rename recordings.
> By confirming with OK, a list appears with the possible titles.
Use the up/down arrow keys to select the title that you wish to assign and con-
>
firm with OK.
Use the arrow keys left/right to select the field OK in the subsequent query
>
window, and confirm by pressing OK.
> If you would like to rename the recording with your choice of name, simply mark a
New entry instead of the displayed names using the up/down arrow keys.
69
7