TechniSat HDTV 32 Plus Operating Manual page 155

Problem
No picture, no sound, LED
lights up
Antenna cannot be rotated
Second encrypted program
cannot be viewed.
Remote control not working
Possible cause
Short circuit in LNC connec-
tion
Defective or missing cable
connection
Defective LNC
False external unit set in the
TV set
Antenna positioned incor-
rectly
Motor not DiSEqC
1.2 compatible
Both the selected programs
are not found on the same
transponder
CI dual decoding not
switched on
The CI module used is
not compatible with "Dual
Decrypt"
False TV remote code set
Batteries spent
Batteries are inserted incor-
rectly
155
Solution
Switch off unit, repair short
circuit, switch unit on again
Check all cable connections
(see Point 4)
Replace LNC
Correct setting (see Point
8.5)
Adjust antenna position
Use suitable motor
Choose two programs, which
are found on the same trans-
ponder/channel
(see Points 6.2 and 6.4.4)
Switch on CI dual decoding
(see Point
8.4.5.1)
Use a CI module with "Dual
Decrypt" capability
Correct the remote control
code setting
(see Point 1)
Replacing batteries
(see Point 3.4)
Remove batteries and
re=insert them, taking care
to ensure correct polarity
(see Point 3.4)
18