Advertisement
CLE AN I NG / MAI N TE N AN C E
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for
your stand fan. Please remember:
• Always unplug the fan before cleaning or disassembling.
• Do not allow water to drip on or into the fan motor
housing.
• Be sure to use a soft cloth moistened with mild soap
solution.
• Do not use any of the following as a cleaner gasoline,
thinner, benzene.
Fan Blade Cleaning
STEP 1: To access the fan blade, remove the front grill
and the fan blade cap.
STEP 2: Clean the fan blade, front and rear grills with a
soft, moist cloth.
STEP 3: Replace blade, tighten blade cap, and securely
fasten the front grill.
Fan Head, Base, and Pole Cleaning
Using a soft, moist cloth, with or without a mild soap
solution, carefully clean the fan base, pole, and head.
Please use caution around the motor housing area. Do
not allow the motor or other electrical components to be
exposed to water.
© 2010 Sunbeam Products, Inc. doing business as Jarden Consumer Solutions. All rights reserved. Imported and
distributed by Sunbeam Corporation (Canada) Limited doing business as Jarden Consumer Solutions, 20B Hereford
Street, Brampton, Ontario L6Y 0M1.
FAN STORAGE
Your fan can be stored in the off-season either partially
disassembled or assembled. It is important to keep it in a
safe, dry location.
• If stored disassembled, we recommend using the
original (or appropriately sized) box.
• If stored assembled or partially assembled, remember
to protect the fan head from dust.
If you have any questions regarding your product or
would like to learn more about other Sunbeam
products, please contact our Consumer Service
Department at 1-888-264-9669 or visit our website at
www.sunbeam.ca.
TM
Printed In China
Advertisement
