Download Print this page

Operating Instructions - Sunbeam SUF1814-CN Instruction Leaflet

High velocity air circulator

Advertisement

F E AT U R E S - O P E R AT I O N S
CLEANING/MAINTENANCE INSTRUCTIONS
Figure 1
Latch locked
in place
A. Rear Fan Head
C. Locking Holes (2)
3. Place the air circulator in upright position with
Sunbeam logo plate facing front (see Figure 2).
Figure 2
4. Plug the air circulator into standard 120V AC
electrical outlet and the fan is ready for use.

OPERATING INSTRUCTIONS

Sunbeam
Air Circulators can be used alone or in
®
conjunction with an air conditioner unit to circulate
already cooled air or to force it into other rooms. During
summer days, the portable Sunbeam
be used as a hassock fan to pick up cool air near the floor
and circulate it through the entire room.
1. To operate fan, turn the speed control knob, located
on the rear grill, to High "3", Medium "2", or Low
"1". To turn the fan off, switch the speed control
knob to Off "0" position.
2. It is normal for the motor to feel warm to the touch
during operation. The motor is thermally protected
and will automatically shut off should it overheat for
any reason. If this happens, immediately disconnect
the fan from the power outlet.
A
B
Latch locked
in place
C
D
B. Latches (2)
D. Base Tube
Fan Head
Logo Plate
Base Tube
Air Circulator can
®
TILT ADJUSTMENT INSTRUCTIONS
To adjust the angle of the fan simply use both hands to
adjust the fan head to the desired position.
CLEANING/MAINTENANCE INSTRUCTIONS
Follow these instructions to correctly and safely care for
your personal fan.
FAN CLEANING
• Always unplug the fan before cleaning or disassembling.
• Do not allow water to drip on or enter into fan housing.
• Be sure to use a soft cloth moistened with a mild
soap solution.
• Do not use any of the following as a cleaner:
gasoline, thinner, or benzene.
Fan Blade Cleaning Instructions
1. Unlock the clips around the perimeter of the front
grill and use a Phillips Head screwdriver to remove
the screw at the bottom of the grill.
2. Remove the front grill.
3. Clean the fan blade, grill, housing and base with a
soft, damp cloth. DO NOT ATTEMPT TO REMOVE THE
FAN BLADE. Please use caution around the motor
housing area. Do not allow the motor or other
electrical components to be exposed to water.
4. Replace front grill onto rear grill and secure with the
clips and screw removed in the first step.
FAN STORAGE
When storing your fan in the off season, it is important to
keep it in a safe dry location. It is important to protect
the fan head from dust. WE STRONGLY RECOMMEND
USING THE ORIGINAL BOX FROM PURCHASE.
If you have any questions regarding your product or
would like to learn more about other Sunbeam
products, please contact our Consumer Service
Department at 1-888-264-9669 or visit our website at
www.sunbeam.ca.
®

Advertisement

loading