Related Manuals for Sunbeam FA7250
Summary of Contents for Sunbeam FA7250
- Page 1 Sunbeam Tower Fan with Night Mode Instruction Booklet FA7250 90cm Remote Controlled Tower Fan Please read these instructions carefully and retain for future reference. SM8650 featured...
-
Page 2: Table Of Contents
Contents Sunbeam’s Safety Precautions Safety Precautions For Your Tower Fan Locating Your Tower Fan Features Of Your Sunbeam Tower Fan Using Your Tower Fan Troubleshooting Guide Care and Cleaning Important instructions – retain for future use. -
Page 3: Sunbeam's Safety Precautions
• Never leave an appliance unattended while in use. If you have any concerns regarding the performance and use of your appliance, please visit www.sunbeam.com.au or contact the Sunbeam Consumer Service Line. Ensure the above safety precautions are understood. -
Page 4: Safety Precautions For Your Tower Fan
Safety Precautions For Your Tower Fan • Do not use outdoors. • Do not insert or allow foreign objects to enter any ventilation or exhaust openings • Do not run the cord of the fan under as this may cause electric shock or fire, or carpeting. -
Page 5: Locating Your Tower Fan
Locating Your Tower Fan 1. Always locate your fan on a level surface. 2. Your tower fan should be located in a dry, cool, well ventilated location. Keep your fan away from heat sources, corrosive gases and avoid direct sunlight. 3. -
Page 6: Features Of Your Sunbeam Tower Fan
Features of your Sunbeam Tower Fan Remote control storage When not in use, store your remote control in the handy storage compartment on the rear of the fan body. Carry handle Convenient carry handle allows you to easily carry your fan from room to room. - Page 7 Remote control Adjust the fan setting, auto off, oscillation or activate night mode from anywhere in the room using the full function remote control. Auto Off button Fan speed button The auto off timer allows Choose from 3 speed you to set your tower fan to settings, low medium turn off after either 1, 2, 4 or high.
-
Page 8: Assembling Your Tower Fan
Assembling Your Tower Fan Remove the screws from beneath the tower Join the two halves of the base together Using a phillips head screwdriver, remove the Feed the cord between the two halves of the 4 screws from underneath the tower. base. - Page 9 Assembling Your Tower Fan continued Lower the tower onto the base Screw the tower to the base Align the tower and the base as shown. Use the 4 screws you put aside earlier to secure the tower to the base. Push the tower down onto the base until it is firmly held into position.
-
Page 10: Using Your Tower Fan
Switching the fan on Selecting a fan speed setting Place the fan on a flat level surface. Your Sunbeam tower fan has 3 speed settings as follows: Insert the plug into a 230/240V power outlet and turn the power on. - Page 11 Using Your Tower Fan continued Using the oscillation function Using the auto off timer The 70 degree oscillation function can be The auto off timer automatically switches the used on any setting. fan off after a preset number of hours. Turn the unit on and select any fan speed.
- Page 12 Using Your Tower Fan continued Night mode The night mode function can be used on any setting. When activated, all bright lights on the fan control panel turn off, leaving a dim red power light which keeps the room dark. To use Sleep mode: 1.
- Page 13 Using Your Tower Fan continued Using the remote control Changing the batteries Remove the remote control from its compart- Slide the rear cover off the remote control ment at the rear of the tower as shown. unit. Point the remote towards the control panel Replace the spent batteries with 2 fresh AAA on the front of the tower to operate.
-
Page 14: Troubleshooting Guide
Troubleshooting Problem Possible Cause What To Do Tower fan Air cannot enter the fan through Remove any obstructions does not turn on the intake grill. from around the fan. Ensure the electrical outlet Fan is not receiving power. or circuit breaker is working. Ensure the remote control Remote control Fan isn’t receiving the signal... - Page 15 2 Year Warranty This Sunbeam product is covered by a 2 year replacement or repair warranty, which is in addition to your rights under the Australian Consumer Law (if your product was purchased in Australia) or New Zealand Consumer Guarantees Act (if your product was purchased in New Zealand).
- Page 16 ABN 45 000 006 771 Units 5 & 6, 13 Lord Street Botany NSW 2019 Australia Level 6, Building 5, Central Park 660-670 Great South Road Greenlane, Auckland New Zealand 5/14 Sunbeam Corporation is a division of GUD Holdings Ltd.