Joining The Wing Halves - Pheonix Model Tiger Moth 40 Instruction Manual

Instruction Manual
16
Bend "L" the aileron pushrod.
2

Joining the wing halves.

19
Center line
Draw a center line.
22
Apply the epoxy to the wing section.
25
Center line
Draw a center line.
28
Remove the covering.
3
17
Attach the nylon clasp.
20
Remove the covering.
23
Joining the wing.
26
Remove the covering.
29
Glue the wing joiner to the wing, using
the epoxy glue.
TIGER MOTH 40
18
Make the same way to install the aileron
servo for the second wing.
21
Glue the wing joiner to the wing, using
the epoxy glue.
24
Apply the trim tape to the center
section of the wing where they join.
27
Mark the shape of the wing.
30
Apply the epoxy to the wing section.