Pheonix Model Tiger Moth 40 Instruction Manual page 6

Instruction Manual
45
13mm
Drill 2mm hole for tail gear.
49
Prepare the tail gear as shown.
52
Glue the vertical stabilizer to the
fuselage.
4 Installing the langding gear.
55
The full set of langding gear.
58
Remove the covering.
5
47
Install the wheel and secure it.
50
50 mm
Attach the tail gear into the rudder and
glue it.
53
Secure the tail gear.
56
Install the collar.
59
Install the landing gear and secure it.
TIGER MOTH 40
48
Bend "L" as shown.
51
Glue the rudder hinge by C.A glue.
54
Finishing.
57
Install the wheel and secure it.
60
Attach the plastic cover for landing gear.