Pheonix Model Tiger Moth 40 Instruction Manual page 5

Instruction Manual
31
Joining the wing.
3 Installing the horizontal stabilizer, vertical stabilizer and tail gear.
34
Center line
Make a center line onto the horizontal.
C1 C2
39
Glue the horizontal and fuselage by
epoxy.
42
Mark the shape of the vertical onto the
top of the horizontal.
32
Joining the wing.
35
Remove the covering from the rear of the
fuselage.
37
C1 = C2
Mark the shape of the fuselage onto the
bottom of the horizontal.
40 41
Remove the covering of the vertical.
43
Remove the covering.
TIGER MOTH 40
33
Joining the wing.
36
Attach the horizontal to the fuselage
and check it.
38
Remove the covering from the bottom
of the horizontal.
Remove the covering from the fuselage.
44
Make the slot for the tail gear.
4