Installing The Vitodens 200-W, 125 To 150 Kw Directly Onto A Wall (Single Boiler) - Viessmann VITODENS 200-W Technical Manual

Design information

Installing the Vitodens 200-W, 125 to 150 kW directly onto a wall (single boiler)

The enclosed screws and rawl plugs are only suitable for concrete. For
other construction materials, use fixing materials that are suitable for
145 kg loads.
A Reference point Vitodens top edge
B Area for power cables.
Allow cables to protrude approx. 1200 mm from the wall.
Installation with mounting frame (single boiler)
The Vitodens can be installed freestanding in any room by using the
mounting frame available as an accessory.
The boiler can be levelled by means of adjustable feet.
VITODENS 200-W
(cont.)
6 0
0
5 4
2
Ø 12
E
B
Order connection sets separately for the connection of the heating cir-
cuits and one DHW cylinder.
A
C
C Top edge finished floor
D Recommended dimension: 1975 mm
E Wall mounting bracket
4
VIESMANN
31