Installing The Vitodens 200-W, 45 To 100 Kw Directly Onto A Wall (Single Boiler) - Viessmann VITODENS 200-W Technical Manual

Design information

Installing the Vitodens 200-W, 45 to 100 kW directly onto a wall (single boiler)

The enclosed screws and rawl plugs are only suitable for concrete. For
other construction materials, use fixing materials that are suitable for
100 kg loads.
4
A Reference point Vitodens top edge
B Vitodens installation template
C Area for power cables.
Allow cables to protrude approx. 1200 mm from the wall.
Installation in front of a wall with a self-supporting mounting
frame (single boiler)
The Vitodens can be mounted on the self-supporting mounting
frame.
VIESMANN
30
(cont.)
4 8
0
4 2
2
Ø 10
E
C
2 0
0
An installation template is supplied with the Vitodens 200-W to mark
the position of the screws for the wall mounting bracket and the loca-
tion of the flue pipe on the wall.
Order connection sets separately for the connection of the heating cir-
cuits and one DHW cylinder.
A
B
F
D Recommended dimension: 1975 mm
E Wall mounting bracket
F Top edge finished floor
The mounting panel supplied with the boiler cannot then be used.
VITODENS 200-W