Installing The Rudder Linkages; Installing The Rudder Servo - Pheonix Model Katana 120 Instruction Manual

Instruction Manual
The elevator linkages are assembled as shown below
22mm
95mm

INSTALLING THE RUDDER SERVO

1. Remove the covering from the fuselage.
2. Install the rudder servo to the fuselage as
shown.
39
22mm
40
Remove the covering
41
3. The control horn should be mounted on the
right side of the rudder at the leading edge, in
line with the rudder pushrod.
Control horn

INSTALLING THE RUDDER LINKAGES

. Repeat these step as installing the aileron
linkages (Page 4 and page 5).
22mm
11
Katana 120
22mm
105mm
42
43
44