Extron electronics DisplayPort DP DA2 User Manual page 28

In the Add Device dialog, the path to the new firmware file is displayed in the
10.
field.
Figure 12. Path to the New Firmware File on the Add Device Window
11. If this is the only device to which you are uploading firmware, click
DP DA2 information is added to the Devices section of Firmware Loader and the Add
Device dialog closes.
If you will be uploading the firmware to multiple DP DA2 units that are
connected to your computer, do the following:
Click . Your first device is added to the Devices section of Firmware
a.
Add Next
Loader, and the Add Device dialog remains open.
For each additional device you want to add to Firmware Loader, repeat steps 5
b.
through 9, then click
c. For the last device, click
close the Add Device window.
.
Add Next
(instead of
Add Add Next
DP DA2 • Updating Firmware
Path
. The
Add
) to add the device and to
22