Extron electronics DisplayPort DP DA2 User Manual page 27

In the Open window, navigate to the new firmware file, which has an S19 extension,
9.
and double-click it.
Figure 11. Open Window for Firmware File Selection
ATTENTION:
Valid firmware files must have the file extension
•
extension is not a firmware upgrade for this product and could cause the
switcher to stop functioning.
Les fichiers firmware valides doivent contenir l'extension fichier
•
fichier avec n'importe quelle autre extension n'est pas une mise à jour de
firmware pour cet appareil et l'appareil pourrait arrêter de fonctionner.
NOTES:
The original factory-installed firmware is permanently available on the
•
DP DA2. If the attempted firmware upload fails for any reason, the DP DA2
reverts to the factory version.
When downloaded from the Extron website, by default the firmware is
•
placed in a folder at
C:\Program Files\Extron\Firmware\DP DA2
C:\Program Files (x86)\Extron\Firmware\DP DA2
. A file with any other
S19
S19
(Windows XP) or
(Windows 7).
DP DA2 • Updating Firmware
. Un
21