Attenuation (Att); How To Operate The Side Illumination - Marantz PM-11S1 User Manual

Marantz user guide integrated amplifier pm-11s1
Hide thumbs Also See for PM-11S1:
Table of Contents

Advertisement

HOW TO USE AND SET FEATURES

ATTENUATION (ATT)

Attenuation is a one-touch feature for reducing volume level.
When the ATT button on either the PM-11S1 or the remote
controller is pressed, the volume level is attenuated. When the
PM-11S1 is shipped from the factory, the attenuation level is
set to –20 dB, but it can be set to –20 dB, -40 dB or -∞.
1.
When the ATT button on either the PM-11S1 or the remote
controller is pressed, "ATT" flashes on the display and the
volume level is reduced. When the ATT button is pressed
again or the volume is increased/decreased from the
controls, the mode is canceled and the original volume
level is restored.
2.
When the volume level is at -∞ (muted) and the ATT button
is pressed, the below display appears for about 3 seconds
and attenuation is not applied.
7 7 7 7 7 How to Set Attenuation Level
Attenuation level cannot be set from the remote controller.
1.
Press and hold the ATT button on the PM-11S1 for 2
seconds or longer.
The attenuation level will appear on the display.
SELECTOR
18
DISPLAY button
DISPLAY
TONE
SPEAKER
A
INPUT
PHONES
SPEAKER
B
Side illumination
2.
Set the attenuation level. The setting changes with each
press of the ATT button on the PM-11S1.
3.
When the desired attenuation level setting appears on the
display, leave it unchanged for 2 seconds or longer to enter
the setting. Once entered, the display returns to the volume
level indication.
HOW TO OPERATE THE SIDE
ILLUMINATION
The side illumination has an always-ON mode and an always-
OFF mode. In the always-ON mode, the side illumination turns
ON/OFF in sync with the display.
1.
With the side illumination lit, press and hold the DISPLAY
button for 3 seconds or longer. The side illumination goes
out and the always-OFF mode is engaged.
2.
To cancel the always-OFF mode and turn the side
illumination ON, press and hold the DISPLAY button for 3
seconds or longer.
ATT button
INTEGRARED AMPLIFIER PM-11S1
ATT.
PRE OUT
OPERATE
REC OUT
POWER ON/OFF
PHONO
MC
VOLUME

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents