Trimming - Marantz PM-11S1 User Manual

Marantz user guide integrated amplifier pm-11s1
Hide thumbs Also See for PM-11S1:
Table of Contents

Advertisement

HOW TO USE AND SET FEATURES

TRIMMING

There are three trimming modes.
• LEVEL trimming that adjusts the volume level on left and
right channels
• BASS trimming that adjusts the bass on left and right
channels
• TREBLE trimming that adjusts the treble on left and right
channels
Note
Trimming is performed from the remote controller.
TRIM : This button starts trimming. When multiple PM-
11S1s are connected, this button selects the
amplifier with which to perform trimming. In such
case, trimming is performed in the order of the lowest
to highest ID number.
EXIT : This button ends trimming.
3 : This button increases the trimming level.
4 : This button decreases the trimming level.
2 : This button selects the R channel for trimming.
1 : This button selects the L channel for trimming.
ENTER: This button selects the trim mode (LEVEL, BASS or
TREBLE).
OPEN/
CLOSE
PHONO
RECORDER 1
RECORDER 2
TRIM
L
DISPLAY
RANDOM
TOP MENU
AM/A
RC-11PMS1
SOUND
MODE
BALANCED
CD
LINE 1
LINE 2
EXIT
TONE
+
R
ENTER
-
ATT
VOLUME
SCAN
REPEAT
RETURN
MENU
FM/B
7 7 7 7 7 How to Trim Volume Level
The volume level of the left and right channels can be trimmed
in 0.5 dB steps across a 0.0 - -9.0 dB range. When the PM-
11S1 is shipped from the factory, the volume level is set to 0.0
dB (maximum).
1.
Press the TRIM button once to access the LEVEL trimming
mode.
2.
The flashing "0.0" on the left indicates that trimming is
activated for the left channel volume level. Press the 3
and 4 buttons to set the volume level of the left channel.
Press the 2 button to set the right channel volume level.
3.
When the right side "0.0" starts flashing, trimming is
activated for the right channel volume level. Press the 3
and 4 buttons to set the volume level of the right channel.
4.
To trim the volume level of the ID 2 (slave) PM-11S1, press
the TRIM button again and set volume level as in steps 1 - 3.
After that, pressing the TRIM button again allows you to
trim volume level with ID 3 (slave) PM-11S1 and so forth.
5.
When finished with volume level trimming, press the EXIT
button.
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents