Assembly
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
Battery Installation & Removal
** DO NOT REMOVE THE PLASTIC SHRINK SLEEVE FROM THE BATTERY PACK.
To install the battery:
First, turn the power switch to the
off position. Press on the two circles of the
battery cover and slide the cover towards
you and insert the battery.
Installing & Removing the Side Brush
To install: Push the brush directly onto
the holder.
Install the battery in the compartment,
ensuring the +/- terminals of the battery
match the +/- indicators in the battery
compartment
To remove: Hold the brush bristle and
pull upward to remove the brush.
www.BISSELL.com
5