Page of 24

Bissell 1699 SERIES - 120V User Manual

Bissell carpet cleaner user manual.
Hide thumbs
U S E R ' S G U I D E
1699 SERIES - 120V
8905 SERIES - 120V
Safety Instructions
Product view / Accessories
Features / Operations
Routine Maintenance
Consumer Services
Replacement Parts


   Related Manuals for Bissell 1699 SERIES - 120V

   Summary of Contents for Bissell 1699 SERIES - 120V

  • Page 1

    ProHeat ClearView ™ ® U S E R ’ S G U I D E 1699 SERIES - 120V 8905 SERIES - 120V Safety Instructions Product view / Accessories Assembly 6-17 Features / Operations Routine Maintenance 18-20 Troubleshooting 21-22 Consumer Services...

  • Page 2

    My great-grandfather invented the floor sweeper in 1876. Today, BISSELL is a global leader in the design, manufacture, and service of high quality homecare products like your ProHeat Clearview. Thanks again, from all of us at BISSELL.

  • Page 3: Important Safety Instructions, Save These Instructions, Grounding Instructions

    Do not unplug by pulling on the cord. Use only manufacturer’s recommended attachments Use only cleaning products formulated by BISSELL for use in this appliance Keep openings free of dust, lint, hair, etc. Do not point attachment nozzle at people or animals.

  • Page 4

    DirtLifter ® Belt Access Door PowerBrush Floor Nozzle Window Keep plenty of genuine BISSELL Advanced Cleaning Formulas on hand so you can clean whenever it fits your schedule. Always use Trigger genuine BISSELL deep cleaning formulas. Non-BISSELL cleaning solutions may harm the machine and void the warranty.

  • Page 5

    Familiarize yourself with the parts and where they go. Following this User’s Guide will greatly enhance your ability to get the most performance from your BISSELL ProHeat ClearView for many years. Your ProHeat ClearView comes in three, easy to assemble components.

  • Page 6

    Special Features of Your BISSELL ProHeat The BISSELL SmartClean The ProHeat ClearView is a home cleaning system that automatically mixes hot tap water with the BISSELL advanced cleaning formula and heats the solution as it is applied to the carpet. The combination of heated cleaning solution, powered brush and suction provide a safe &...

  • Page 7

    Make sure machine is secure and level. The pow- ered WARNING: To reduce the risk of fire, use only BISSELL Deep Cleaning Formula in your ProHeat ClearView. Use of cleaning formulas which contain lemon or pine oil may damage this appli- ance and void warranty.

  • Page 8

    Tank-in-Tank Our Tank-in-Tank system is designed with a Bladder inside for clean water. As you clean, the Bladder will empty. Dirty water collects in the tank outside the Bladder. Step on handle release to lay the machine handle down out of the way. Lift the Tank-in-Tank handle.

  • Page 9

    F. Reinsert Tank Assembly into unit. Refill with clean tap water as above, steps 5 through 9 on page 8, and refill the SmartMix bottle with BISSELL Deep Cleaning Formula as necessary. When the cleaning job is complete, rinse out the Tank-in-Tank by rinsing clean water between the Bladder and tank.

  • Page 10

    The Flow Indicator This is located on the machine base. It spins when the trigger is pressed to indicate that the machine is applying cleaning solution to the floor. It will stop spinning to indicate that the SmartMix bottle or Bladder needs to be refilled, or when the trigger is released.

  • Page 11

    Machine Preparation Set up the machine following instructions in The Features section, pages 6-11. Use a BISSELL Advanced Cleaning Formula in the SmartMix tank.When cleaning carpets, stairs or upholstery, use clean water in the SmartMix Tank for gentle cleaning or rinsing.

  • Page 12

    While pressing the trigger slowly make several passes over the area to be cleaned. Caution Do not overwet. Turn the machine Power Switch OFF and let the BISSELL Advanced Cleaning Formula dissolve the tough soil for 1-2 minutes before continuing.

  • Page 13

    You may repeat this process several times. Use your BISSELL deep cleaner as a Precleaner. With one of the tools attached to hose, set the Ready Tools dial to Pretreat and the Smart Mix dial to the High Traffic setting.

  • Page 14

    How to Clean Upholstery and Small Areas Important - Check Upholstery Tags: Check manufacturer’s tag before cleaning. “W” or “WS” on the tag means you can use your ProHeat ClearView. If the tag is coded with “X” or “S” (with a diagonal strike through), or says “Dry Clean Only,”...

  • Page 15

    Machine Preparation Set up the machine following instructions in the Features section, pages 6-11. Use BISSELL Advanced Cleaning Formulas in SmartMix tank. Set the ReadyTools dial to Tools or PreTreat. * SmartTemp heats the cleaning solution for carpet and bare floor application only. It does not heat solution sprayed through the accessory tools.

  • Page 16

    The Bare Floor Tool is included in select models only. If your ProHeat CleaView did not come so equipped, you may contact BISSELL Consumer Services at or 1-800-237-761 to order one. The Bare Floor Tool provides effective cleaning for linoleum, vinyl, and tile floors.

  • Page 17

    6-11. Be sure to thoroughly rinse out any remaining Fiber Cleansing Formula from the SmartMix bottle to prevent slippery linoleum, vinyl, and tile floors. Use BISSELL Floor Cleansing Formula in the SmartMix tank. Check ReadyTools Dial - it should be set on Floor Cleaning.

  • Page 18

    Routine Maintenance Turn Power and SmartTemp switches OFF. Unplug power cord from the outlet and coil around Power Cord Quick Release. Remove and rinse tools in clean, running water, dry and replace in the Tool Caddy. Coil Flex Hose around storage brackets on Tool Caddy. Remove Tank-In-Tank, dispose of dirty water.

  • Page 19

    Pump Belt Replacement To Remove Broken Pump Belt Turn the machine off and unplug from the wall outlet. Step on the release pedal and recline the handle down onto floor (see illustration). Remove Tank-In-Tank and SmartMix tanks. Set them aside (see illustration).

  • Page 20

    Turn the machine right side up and replace the Tank-In-Tank, SmartMix Tank and Belt Access Door (see illustration).) Assembly is now complete. If you have any questions, or are having trouble installing your replacement pump belt, please call BISSELL Consumer Services at 1-800-237-7691.

  • Page 21

    Both switches must be ON to activate the SmartTemp Ready Light. Remedies Refill tank with hot tap water. Fill with BISSELL Deep Cleaning Formula for cleaning or water if rinsing. Clean out Flow Indicator Filter, page 18. Turn power OFF; remove & reseat tanks.

  • Page 22

    Grand Rapids MI 49501 ATTN: Consumer Services Or visit the BISSELL website - When contacting BISSELL, have model number of unit available. Please record your Model Number: ___________________ Please record your Purchase Date: ___________________ NOTE: Please keep your original sales receipt. It provides proof of date of purchase in the event of a warranty claim.

  • Page 23

    Replacement parts - BISSELL ProHeat ClearView Item Part No. Part Name 210-9201 4” Small Area Tool 603-0910 6” Stair Tool 210-9148 Spraying Crevice Tool 210-1197 TurboBrush ® 214-9131 Bare Floor Tool 014-9142 PreTreat Wand 215-9155 Tough Stain Brush 015-9043 Tank Assembly Complete...

  • Page 24

    BISSELL HOMECARE, INC. IS NOT LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE ASSOCIATED WITH THE USE OF THIS PRODUCT. BISSELL’S LIABILITY WILL NOT EXCEED THE PURCHASE PRICE OF THE PRODUCT. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.

Comments to this Manuals

Symbols: 0
Latest comments:
  • Jenson Jan 13, 2013 02:20:
    I got this thing for $199 at target 9 years ago