Battery Installation And Removal - Bissell DIGIPRO 2142 Series User Manual

Assembly
WARNING
Do not plug in your vacuum until you are familiar with all instructions and operating
procedures.
Battery Installation & Removal
** DO NOT REMOVE THE PLASTIC SHRINK SLEEVE FROM THE BATTERY PACK.
To install the battery:
Turn the power switch to the OFF position.
Press on the grooves above the two circles
of the battery cover and slide the cover
towards you and insert the battery.
Installing & Removing the Side Brush
To install: Push the brush directly onto
the holder.
Install the battery in the compartment,
ensuring the +/- terminals of the battery
match the +/- indicators in the battery
compartment
To remove: Hold the brush bristle and
pull upward to remove the brush.
www.BISSELL.com
5