Operations; On-Screen Display Menu Controls - Marantz VP8600 User Manual

OPERATIONS

On-Screen Display Menu Controls

The projector has an On-Screen Display (OSD) that lets you make picture adjustment and
change various settings.
❖
Navigating the OSD
Press MENU to open the OSD, and then use the arrow buttons (up/down
navigate and make changes. Press ENTER to enter menus and confirm settings. Press the
EXIT button to exit menus. Press MENU to close the OSD.
The example below demonstrates how to change the Brightness setting in the Picture
Adjust menu, and then navigate to the Horizontal Size setting in the Display menu.
1.
Press MENU. The Picture Adjust menu (or last open menu) appears.
2.
Press ENTER to select Brightness.
1 2
3.
Press to adjust the brightness.
4.
Press EXIT to leave the Picture Adjust menu.
34
5.
Press until Display is highlighted and
press ENTER. The Display menu opens;
the Horizontal Size setting is selected.
1 2
6.
Press to adjust the horizontal setting.
7.
Press MENU to close the OSD.
16
34 1 2
, left/right
2, 5
1, 7
V-MUTE MENU
M
INPUT
F E
3, 6
EXIT
FREEZE
PIP
) to
❖
Setting the OSD Language
You may want to reference the OSD on your projector while reading this section. Set the OSD
language to your preference before continuing. (Available languages are English, Francais,
Italiano, Deutsch, and Español. The default language is English.)
1.
Press MENU. The Picture Adjust menu (or the last open menu) appears.
34
2.
Press until Config. is highlighted and then press ENTER.
34
3.
Press until Language is highlighted.
1 2
4. Press to select the language you want.
4
5.
Press ENTER to confirm.