Connection With A Hd-Video, Dvd Player, Satellite, Cable Tuner Or Pc - Marantz VP8600 User Manual

COMPONENT 1: SCART
When connecting the COMPONENT 1 terminal to the SCART (RGB) out terminal, set
COMPONENT 1 settings to [SCART]. (
Scart to RGBCS cable
(commercially available)
SCART CONNECTOR
COMPONENT 1: RGB
When connecting the COMPONENT 1 terminal to the RGB HV out terminal, set
COMPONENT 1 settings to [RGB]. (
5RCA cable
(commercially available)
8
P.19)
STANDBY FL OFF
DVD Player
P.19)
V H R B G
MONITOR OUT
PC

Connection with a HD-Video, DVD Player, Satellite, Cable Tuner or PC

You can connect this projector to HD-Video /PC using RGB IN port, or DVD Player/Satellite
/Cable Tuner /PC using DVI-D IN port.
1.
Connect one end of the RGB cable to the RGB IN port, or one end of the DVI-D cable to
the DVI-D IN port on the projector.
2.
Connect the other end to the corresponding port on a HD-Video, Satellite, Cable Tuner or
personal computer.
Note : When projecting a video image from a device connected to the DVI-D terminal,
follow the procedure below.
1. Turn on power of this unit.
2. Set the input video source to DVI-D input.
3. Turn on power of the device connected to the DVI-D terminal of the unit (i.e. DVD
player).
If the procedure above is not followed, projected image may corrupt.
For the details of the DVI-D terminal on the device connected with the unit, see the
instruction manual of the device.
RGB (D-Sub monitor) cable
(commercially available)
DVI-D cable
(commercially available)
RGB out
RGB OUT
or
or
DVI-D out
DVI-D out
or
HDMI out
HD-Video / Satellite /
Cable Tuner / DVD Player
Monitor output
RGB out
RGB OUT
or
or
DVI-D out
DVI-D out
IBM VGA or
Compatible PC