Illumination; Display - Docomo DisneyMobile SH-02G Instruction Manual

Illumination

You can set when to make the incoming/charging illumination
flash according to the settings of Disney Illumi Controller. You
can set a flashing pattern or an illumination color for when
receiving a call individually.
1
In the home screen, display the Apps
[Settings]/[Illumination]
2
Select an item
Controller: For details nP. 31 "Disney Illumi
Disney Illumi
Controller"
Illumi pattern/color for incoming
flashing pattern or an illumination color for when receiving a
call.
･ Set it to [Illumi Controller] to make the illumination flash
according to the settings of Disney Illumi Controller.
Notification: Set whether to make the illumination flash when
receiving a notification.
When display turns on: Set whether to make the illumination
flash when the display is turned on.
For incoming call: Set whether to make the illumination flash
when receiving a call.
For rumbling alarm: Set whether to make the illumination
flash while an alarm is ringing.
When start charging: Set whether to make the illumination
flash when charging starts.
When unlocking: Set whether to make the illumination flash
when unlocking the touch panel.
If Smartphone pierce (sample) is inserted into the handset, the
pierce shines according to the settings of Illumination.
The color of flashing for Smartphone pierce cannot be changed.

Display

You can make settings for the screen display etc.
1
In the home screen, display the Apps
[Settings]/[Display]
2
Select an item
Wallpaper: Set an image for the home screen.
Welcome Sheet(lock
displayed when the touch panel is locked. For details on the
settings nP. 16 "Welcome Sheet settings"
EDGEST Effect: Make settings for the effect on edges of the
screen shown when the display is turned on, during an
incoming call, etc.
Brightness: For details nP. 69 "Brightness"
Screen timeout: Set the light duration of the backlight.
Quality mode: Make settings for the picture quality.
Auto-rotate screen: Set whether to switch the screen to
horizontal/vertical display when rotating the handset 90° to
the left/right.
motion: For details nP. 69 "Screen on/
Screen on/off with
off with motion"
Font Settings: Make settings for the text size or text font.
VeilView: For details nP. 70 "VeilView"
Daydream: Set whether to use the screen saver.
Display left percents of
percentage of the remaining battery level on the status bar.
[Welcome Sheet(lock screen)]
You can set it only when [Feel UX] is selected in Batch change
lock screen/ home application.
Sheet/
call: Make settings for a
Sheet/
screen): Make settings for the screen
Battery: Set whether to display the
[Screen timeout]
Note that the continuous stand-by time is shortened when
increasing the light duration.
[Auto-rotate screen]
This function may not follow the setting depending on the app in
use.
[Font Settings]
Font may not appear correctly when activating an app
downloaded from Google Play etc.
Brightness
1
In the home screen, display the Apps
[Settings]/[Display]/[Brightness]
2
Select an item
Automatic brightness: Set whether to automatically adjust
brightness of the backlight. When not automatically
adjusting, set the brightness manually.
Brighten while charging: Set whether to brighten the display
while charging.
3
[OK]
[Automatic brightness]
Note that the continuous stand-by time is shortened when
increasing the brightness of the screen.
Screen on/off with motion
You can make settings for the functions to turn the display on/
off with motions such as when you hold the handset with your
hand, when you put it into your pocket or when you slide the
touch panel with your finger.
1
In the home screen, display the Apps
[Settings]/[Display]/[Screen on/off with
motion]
2
Select an item
Bright Keep: Set whether to set the display not to be turned
off while holding the handset with your hand.
Turn off by putting
turned off when placing the handset on a place nearly
parallel to the ground regardless of the setting of Screen
timeout.
Turn off by putting in
be turned off when putting the handset in your pocket.
Sweep ON: Set whether to set the display to be turned on by
sliding the touch panel with your finger while the display is
turned off.
Video tutorial: Connect to the SHARP website and check
how to use with a video tutorial.
[Bright Keep]
If you do not move or operate the handset for a certain period of
time, the display may be turned off even while Bright Keep is
set and you are holding the handset with your hand.
When Bright Keep is set to [ON (Notify)], [\] is displayed on
the status bar.
[Turn off by putting flatly]
This function is available when Bright Keep is set to [ON
(Notify)]/[ON (Not notify)].
This function may not follow the setting depending on the app in
use.
69
flatly: Set whether to set the display to be
pocket: Set whether to set the display to
Handset Settings
Sheet/
Sheet/