Illumination; Display - Docomo Aquos compact SH-02H Instruction Manual

Table of Contents

Advertisement

[When device is locked]
The following items can be set.
Show all notification content: Set to display the notifications in
the lock screen.
Hide sensitive notification content: Set not to display details
such as the other party's phone number or the number of
notifications in the lock screen.
・ You can use this item when Screen lock is set to an item
other than [None] or [Swipe or Touch].
Don't show notification at all: Set not to display the
notifications in the lock screen.
Mode settings
You can set to avoid disturbing others when in public.
1
In the home screen, [R]/[Settings]/[Sound/
notification]/[Mode settings]
: Alternatively, H (for at least 1 second)/[c]/[d]/[e] to
enable/disable the manner mode.
2
Select the type of the manner mode
Standard manner
mode: The ringtone and operation sound
are silenced, and the vibrator is activated when receiving a
call or others. When Answering memo setting is set to
[Mannermode], the answering memo is enabled and operated
according to its setting.
Silent manner
mode: The ringtone and operation sound are
silenced, and even the vibrator is not activated when
receiving a call or others. When Answering memo setting is
set to [Mannermode], the answering memo is enabled and
operated according to its setting.
OFF: Disable the manner mode.
The following sounds are not silenced even when the manner
mode is set.
Shutter sound of shooting still pictures
Focus locking sound of shooting still pictures
Record start/end sound of shooting videos
Media playback sound (music, video, 1Seg, etc.)
The manner mode is disabled if you turn the ringtone volume up
while the manner mode is set. The manner mode is set if you set
the ringtone volume to "0" when the manner mode is not set.

Illumination

You can set when to make the incoming/charging lamp flash.
You can set a flashing pattern or an illumination color for when
receiving a call.
1
In the home screen,
[Illumination]
2
Select an item
For incoming
call: Set whether to make the illumination flash
when receiving a call.
Illumi pattern/color for incoming
flashing pattern or a flashing color for when receiving a call.
Notification: Set whether to make the illumination flash when
receiving a notification.
When start
charging: Set whether to make the illumination
flash when charging starts.
When
unlocking: Set whether to make the illumination flash
when unlocking the touch panel.
[R]/[Settings]/
call: Make settings for a

Display

Make settings for the screen display etc.
1
In the home screen, [R]/[Settings]/[Display]
2
Select an item
Wallpaper: Set an image for the home screen.
Welcome
Sheet: Make settings for the screen displayed when
the touch panel is locked.
EDGEST
Effect: Make settings for the effect on edges of the
screen shown when the display is turned on, during an
incoming call, etc.
level: For details nP.65 "Brightness level"
Brightness
Screen
timeout: Set the light duration of the backlight.
Quality
mode: Make settings for the picture quality.
glove
mode: Set whether to make it possible to operate by
touching the screen while wearing a glove.
When device is
rotated: Set whether to switch the screen to
horizontal/vertical display when rotating the handset 90° to
the left/right.
Font
Settings: Make settings for the text size or text font.
VeilView: For details nP.66 "VeilView"
Daydream: Set whether to use the screen saver.
Display left percents of
percentage of the remaining battery level on the status bar.
[Welcome Sheet]
You can set it only when [Feel Home] is selected in Batch
change lock screen/ home application.
[Screen timeout]
Note that the continuous stand-by time is shortened when
increasing the light duration.
[glove mode]
Touching operation may not be available depending on
materials for the glove.
Sweep ON (nP.68 "On/off with motion") is not available while
wearing a glove although [glove mode] is set to ON.
Set [glove mode] to OFF when you are not wearing a glove.
[When device is rotated]
This function may not follow the setting depending on the app in
use.
[Font Settings]
Font may not appear correctly when activating an app
downloaded from Google Play etc.
Brightness level
1
In the home screen,
[Display]/[Brightness level]
2
Select an item
Automatic
brightness: Set whether to automatically adjust
brightness of the backlight. When not automatically adjusting,
set the brightness manually.
Brighten while
charging: Set whether to brighten the display
while charging.
3
[OK]
[Automatic brightness]
Note that the continuous stand-by time is shortened when
increasing the brightness of the display.
65
Battery: Set whether to display the
[R]/[Settings]/
Handset Settings

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Aquos compact SH-02H and is the answer not in the manual?

Questions and answers

Table of Contents