Useful; Energy Save Standby - Docomo DisneyMobile SH-02G Instruction Manual

3 Switch by batt.
Set whether to switch to Energy save when the battery
level reaches the specified level.
4 Battery level to switch
Set the battery level to switch to Energy save at.
5 Switch time
Set whether to switch to Energy save when specified time
arrives.
When Energy saving standby is set to [ON], it controls the apps
that operate in the background while the display is turned off.
The apps that communicate periodically may not start the
communication even if Energy saving standby is set to [OFF]. In
this case, set the corresponding app again.
When [Energy save] is enabled by Switch by batt.
[Energy save] is not disabled even when the time set for Switch
time arrives.
[Energy save] is disabled when the battery level exceeds the
battery level to switch.
[Energy save] is not disabled even if [Switch by batt.] is
disabled.

Energy save standby

You can control the apps that operate in the background while
the display is turned off.
1
In the home screen, display the Apps
[Settings]/[Battery & energy saving]/[Energy
save standby]
2
Set
1 Eco standby
Switch to Eco standby.
2 Edit
Set apps to control.
3 Battery usage status
Visually check changes in the remaining battery level,
battery consumption level, etc.

Useful

You can make settings for エモパー(Japanese only) (emopa
(Japanese only))/Grip sensor/Recent apps key/Navigation key,
perform Self check, etc.
1
In the home screen, display the Apps
[Settings]/[Useful]
2
Select an item
エモパー(Japanese only)
details nP. 71 "emopa"
sensor: For details nP. 18 "Grip sensor"
Grip
Recent apps key: Set a function to use when you touch
[}]. For details nP. 17 "Operation while using function"
check: For details nP. 72 "Self check"
Self
Navigation key: Make settings for intervals among the
navigation keys.
Sheet/
Sheet/
(emopa (Japanese only)): For
emopa
Based on your information and settings of emopa registered in
advance, the handset delivers various information through
voice or screen display in the lock screen of the touch panel.
The handset will get to deliver information at better timing by
learning the usage conditions of your handset.
Packet communication charges are incurred when you use
emopa.
The present location may be measured so that emopa can
recognize your home etc. or talk to you. It is necessary to set
Location to [ON] to measure the present location. Set Mode of
Location to [High accuracy]. If Location is set to [OFF] or Mode is
set to [Battery saving], emopa cannot deliver information
requiring measurement of the present location
(nP. 73 "Location").
エモパー(Japanese only) (emopa (Japanese only)) is set to
[OFF] by default.
1
In the home screen, display the Apps
[Settings]/[Useful]/[エモパー(Japanese only)]
(emopa (Japanese only))
: If the initial settings are not completed, the initial settings
screen appears. Follow the instructions on the screen and
operate.
: It is recommended to make settings for 自宅 (Home) and 職
場 ・ 学校 (Workplace and school) of [あなたについて] (About
you) after completing the initial settings.
2
Select an item
エモパー選択 (Select emopa): Set emopa and its name.
マナーモード中も声でお話し
mode): Set whether to have emopa deliver information with
voices even while the manner mode is set.
(About you): Make settings for your information
あなたについて
such as your nickname, home, workplace and school.
エモパーの話題
information emopa delivers.
エモパーの記憶
restore information registered for emopa or contents learned
by emopa.
(Initial settings): Make initial settings for emopa.
初期設定
(Precautions): Check the terms of service, privacy
注意事項
policy and location information of a facility etc. you use now.
Timing for emopa to talk
If you put down the handset horizontally etc. while the lock
screen of the touch panel is displayed or while the display is
turned off in a place which you set for 自宅 (Home) of [あなたに
ついて] (About you), emopa starts to talk.
If you shake the handset several times (approximately
2 seconds) in the lock screen in a place which you set for 自宅
(Home) of [あなたについて] (About you) or other places, emopa
starts to talk regardless of the time.
If you do not make settings for 自宅 (Home) of [あなたについて]
(About you), emopa automatically recognizes your home. It
takes a few days to finish recognizing your home.
When you make initial settings for emopa, [Pedometer On] is
enabled (nP. 65 "Pedometer").
You can adjust the volume by pressing x/y while emopa
is talking.
emopa does not talk from 2:00 a.m. to 5:00 a.m.
emopa supports only Japanese.
Information delivered by emopa may not accurately correlate to
the usage conditions of your handset.
71
(Talk to you during manner
(Topics of emopa): Set what kind of
(Memories of emopa): Save, delete or
Handset Settings
Sheet/