F5 ARX-500 Hardware Reference Manual page 73

ARX-2500 LED Indicators
ARX Hardware Reference Guide
The following sections describe the ARX-2500 LEDs, including:
• ARX-2500 Ethernet LEDs, on page 4-19
• ARX-2500 Power LEDs, on page 4-20
• ARX-2500 Hard Disk Drive LEDs, on page 4-20
• ARX-2500 Alarm and Status LEDs, on page 4-20
ARX-2500 Ethernet LEDs
The ARX-2500 supports both copper and fiber/SFP interfaces.
provides details on these LEDs for these interfaces.
Important
For the 10G interface, the SPEED LED blinks blue.
Table 4.19 ARX-2500 Ethernet LED States
Label Color Indicator
ACT/LINK Green or On
other
Off
Green or Flashing
other
SPEED Blue On
Red On
.
Chassis Overview
Status
• Ethernet is receiving power.
• Good linkage between the Ethernet port
and its supporting hub.
• Adapter and switch are not receiving
power.
• No connection between both ends of
network cable.
• The Ethernet drivers have not been
loaded or do not function correctly.
Adapter is sending or receiving network
data. The frequency of the flashes varies
with the amount of network traffic.
When ACT/LINK LED is on, the switch is
operating at 10 Gbps.
When ACT/LINK LED is on, the switch is
operating at 1 Gbps.
Table 4.19
4 - 19