F5 ARX-500 Hardware Reference Manual page 65

ARX Hardware Reference Guide
ARX-1500 Power LEDs
The power LEDs are located to the right of the console port. Details are
provided in the following table.
Table 4.8 ARX-1500 Power LEDs
Symbol Function
Power status
ARX-1500 Hard Disk Drive LEDs
Each drive includes 2 LEDs located on the front of the drive.
The left LED indicates power. Possible states:
• Off. No power; the system is off.
• Green. Power has been applied; the system is on.
The right LED indicates disk activity. Possible states:
• Off. No data activity.
• Green. Disk activity.
ARX-1500 Alarm and Status LEDs
The alarm and status LEDs are located to the right of the drive LEDs.
The combined alarm and status LEDs indicate the state of the device as
described in the following table.
Table 4.9 ARX-1500 Alarm and Status LEDs
Alarm Status
Off Green
Off Yellow
Indicator Status
Green Off: No power, system off.
On: Power good, system on.
State
Online.
ARX-1500 is powering up and the ARX
software is initializing. These activities occur
after the LED driver is loaded.
Also displayed when the reload command is
issued.
Displayed when the reload command is
executing or immediately after the interview
process has finished.
Chassis Overview
4 - 11