F5 ARX-500 Hardware Reference Manual page 70

Chapter 4
Switch Hardware and Functionality
4 - 16
The following table describes the LED colors and patterns that occur during
various operational states, such as booting, diagnostics, and so on.
Table 4.14 ARX-2000 Alarm and Status LED States
Alarm LED Status LED
Off Green
Red Green (blinking)
Off Amber
Red Amber
Off Off
ARX-2000
Ethernet Port Link Status LEDs
The Ethernet ports are located on the lower right front panel. The Ethernet
port LED labels are pointed out in the following figure. For details and
associated status, see Table
Figure 4.10 ARX-2000 Ethernet Port LED Labels
Table 4.15 ARX-2000 Ethernet Port Link Status LEDs
LED
LED in upper left
connector corner
LED in upper right
connector corner
Module State
Online.
In the process of booting.
Online Partial. At least one processor is online,
but at least one processor is not yet online.
If the offline processor does not come online in
5 minutes, this status changes to Failed Partial.
Failed Partial. At least one processor is online,
but at least one processor has failed.
No power.
4.15.
Status
• Steady amber. Port is enabled and a link
established at 100MB.
• Steady green. Port is enabled and a link is
established at 1000MB.
Activity status. Flashing green indicates packet
traffic.