F5 ARX-500 Hardware Reference Manual page 23

Power Cord Usage
Electric Shock Warning
SELV Circuit Warning
ARX Hardware Reference Guide
WARNING
The power supply cords were designed to be connected and used for
F5 devices, and the safety for this purpose has been confirmed.
Please do not use them for other devices or usages. There may be danger of
causing fire or electric shock..
The ARX is configured with the same number of power cords as power
supplies. If you must remove AC power, disconnect each power cord before
servicing the device.
L'ARX possède plusieurs blocs d'alimentation; prenez soin de débrancher
tous les cables d'alimentation si vous souhaitez mettre l'équipement hors
tension.
WARNING
The ports labeled LINK, 1/1 through 1/6, CONSOLE, MGMT, MIRROR,
and DEBUG are safety extra-low voltage (SELV) circuits. SELV circuits
should only be connected to other SELV circuits.
Les ports étiquetés LINK, 1/1 through 1/6, CONSOLE, MGMT, MIRROR, et
DEBUG sont des circuits de sécurité basse tension (safety extra-low voltage
ou SELV). Les circuits SELV ne doivent être interconnectés qu'avec d'autres
circuits SELV.
Safety and Regulatory Notices
1 - 13