System Board - HP Pavilion 10 Maintenance And Service Manual

System board

Description
UMA E1-6200 2 GB for use with FreeDos and Ubuntu
UMA E1-6200 2 GB Standard
UMA E1-6200 4 GB for use with FreeDos and Ubuntu
UMA E1-6200 4 GB Standard
UMA E1-6200 2 GB eMMC for use with FreeDos and Ubuntu
UMA E1-6200 2 GB eMMC Standard
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the keyboard (see
5. Remove the base enclosure (see
6. Remove the battery (see
7. Remove the following components:
a. Display video cable if not already removed.
b. WLAN (see
c. Speaker assembly (see
d. Hard drive (see
When replacing the system board, be sure to remove the following components from the defective
system board and install on the replacement system board:
RTC battery (see
●
TouchPad cable (see Step 7 below).
●
Remove the system board:
NOTE: The heat shield is spared with the system board. You will need to remove the heat shield to
remove the system board.
1. Position the top cover upright with the front toward you.
42 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Keyboard on page
Base enclosure on page
Battery on page
WLAN/Bluetooth combo card on page
Speaker assembly on page
Hard drive on page
RTC battery on page 44).
25).
28).
36).
37).
39).
40).
Spare part number
769701-001
769701-501
769702-001
769702-501
777619-001
777619-501