Rtc Battery - HP Pavilion 10 Maintenance And Service Manual

6. Turn the system board upside down to access the TouchPad cable.
7. Lift the TouchPad cable connector (1) and gently pull the TouchPad cable (2) to remove it.
Reverse this procedure to install the system board.

RTC battery

Description
RTC battery
Before removing the RTC battery, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the keyboard (see
5. Remove the base enclosure (see
6. Remove the battery (see
7. Remove the following components:
a. Remove the
b. Display video cable if not already removed.
c. WLAN (see
44 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
Keyboard on page
Base enclosure on page
Battery on page
System board on page
WLAN/Bluetooth combo card on page
25).
28).
36).
42.
37).
Spare part number
718440-001