HP Pavilion 10 Maintenance And Service Manual page 39
Hide thumbs
Also See for Pavilion 10:
- Installation notes (3 pages) ,
- Maintenance and service manual (38 pages)
Table of Contents
Advertisement
4.
Remove the following covers and eight Phillips screws that secure the base enclosure to the
computer:
NOTE:
Rubber screw covers are available in the Rubber Kit, spare part number 758641-001.
5.
Remove the four Phillips 6.0×2.5 screws on the back side of the base enclosure.
6.
Lift the base enclosure to remove it.
Reverse this procedure to install the base enclosure.
Component replacement procedures
29
Advertisement
Table of Contents
