Ec Declaration Of Conformity (Original); Confirmation Of Cip Testing; Health And Safety Of The Operator - Hilti DX E?72 Operating Instructions Manual

13 EC declaration of conformity (original)

Designation:
Type:
Year of design:
We declare, on our sole responsibility, that this product
complies with the following directives and standards:
2006/42/EC, 2011/65/EU.
Hilti Corporation, Feldkircherstrasse 100,
FL‑9494 Schaan
Norbert Wohlwend
Head of Quality & Processes Manage-
ment
BU Direct Fastening
08/2012

14 Confirmation of CIP testing

The following applies to C.I.P. member states outside
the EU and EFTA judicial area: The Hilti DX E-72 has
been system and type tested. As a result, the tool bears
the rectangular PTB approval mark showing approval
number S 832. Hilti thus guarantees compliance with the

15 Health and safety of the operator

15.1 Noise information
Powder-actuated fastening tool
Type
Model
Caliber
Power regulation
Application
Declared measured values of noise characteristics according to 2006/42/EC Machinery Directive in conjunction
with DIN EN 15895
Noise (power) level, L
WA, 1S
Emission noise-pressure level in the work station,
2
L
pA, 1s
Peak sound pressure emission level, L
1 ± 2 dB (A)
2 ± 2 dB (A)
3 ± 2 dB (C)
Powder-actuated fasten-
ing tool
DX E‑72
1991
Tassilo Deinzer
Head BU Measuring Systems
BU Measuring Systems
08/2012
1
3
pC, peak
Technical documentation filed at:
Hilti Entwicklungsgesellschaft mbH
Zulassung Elektrowerkzeuge
Hiltistrasse 6
86916 Kaufering
Deutschland
approved type. Unacceptable defects or deficiencies,
etc. determined during use of the tool must be repor-
ted to the person responsible at the approval authority
(PTB) and to the Office of the Permanent International
Commission (C.I.P.).
DX E‑72
Series
5.6/16 yellow
The tool has no power regulation feature.
Fastening 20 mm laminated wood to concrete (C40)
with the X-U47 P8
115 dB (A)
107 dB (A)
141 dB (C)
en
31